thanks for the clarification

thanks I need to find the right beam and pipes for the structure thanks again.

https://youtu.be/_yOjsk4TUUo

thanks I need to find the right beam and pipes for the structure thanks again.

https://youtu.be/NfeAPqCrT1Q Hi, surfing the net I saw the video of this gentleman who made this tripod to lift weights. I thought that a similar structure to lift small loads could be useful to me but in iron not wood. How do you recommend I make it starting from that project? I would like to make ...

could you kindly attach some photos or a drawing with 4 reference measurements thanks



[https://svarkaed.ru/wp-content/uploads/ ... 9s-960.jpg][/img]

I bought a 30 cm x 80 cm wide board that I will divide in two to make the shelves, I have to buy the 30 x 30 mm angle to make the 70 cm high iron structure I hope it is stable enough and will not tip over, do you think it will be a good job or will it be unstable in terms of height width depth ratio...

I bought a board 30 cm wide and about 70 cm long, I cut it in half and make the shelves, I make the frame in an angle, similar to a stool about 60 cm high but without wheels to make it more stable, I could put some reference photos thanks, sorry if I bother you thanks https://img.bigshopper.nl/v7/ht...

I wanted to put 2 threaded rods and a wooden crosspiece on top to fix the handle to the trunk, do you also need a cage around the car like a roll bar? I won't put the wheels on for stability reasons, I'm undecided between a height of 60 centimetres and 70, how high would you make it? At least 45x45 ...

I wanted to put 2 threaded rods and a wooden crosspiece on top to fix the handle to the trunk, do you also need a cage around the car like a roll bar? I won't put the wheels on for stability reasons, I'm undecided between a height of 60 centimetres and 70, how high would you make it? At least 45x45 ...

bench support protection portable inverter welding machine help advice salve recentemente ho comprato una piccola saldatrice inverter monofase, a elettrodo mma da 200 ampere, vorrei realizzare un banchetto tipo uno sgabello per fissarla sopra e proteggerla da eventuali https://content.instructables....

thanks for the right suggestions, the frame that should be fixed to the machine wouldn't it be ideal to make it in profiled perhaps shaped? thanks

https://www.raexsteel.com/en/abrasion-resistant-steel

blade dozer.png scraper blade to be applied to mini tracked transporter Hi, a friend of mine would like me to make him a small bulldozer to attach to the front of his small tracked transporter to use both to move snow on the driveway and to level and spread gravel on his garden path. What material ...

could you kindly attach photos, thank you, the idea was to bring up some metal boxes, anchor them to the attic, create a closed perimeter frame with beams and screw corrugated sheets to them, no hut or shed, making a structure means employing workers, engineers, surveyors and a crane, only the crane...

https://www.iforgeiron.com/uploads/monthly_2024_02/image.png.08d8a1590cb34ccf132794d6f202873a.png https://www.iforgeiron.com/uploads/monthly_2024_02/image.png.2fbdf08920a68eaae92540a441b02b01.png https://www.iforgeiron.com/uploads/monthly_2024_02/image.png.e58e8226876ed1e0443c6fbe47f7a8f0.png https...

metal load-bearing frame for terrace roofing :?: Hi, for an old house of mine where when it rains water gets inside I would like to create a metal structure to place on the terrace, give it a slope and put corrugated metal sheets on it, can you help me, 10 meters long, approximately 14 meters wide, ...

design aid hand tool for digging holes in the ground countryside: hello, I would like to make a tool at 0 cost with waste materials to make holes in the ground to bury wooden poles and plant plants some feasible ideas by spending a few money thanks :?: [https://youtu.be/pr0o2NWx93g][/youtube] https:...

thanks for the valuable suggestions

I found out if the device is equipped with an electric hoist with a capacity exceeding 350 kg it must be certified and accompanied by a project by a professional such as an engineer
https://youtu.be/_yOjsk4TUUo

https://youtu.be/aJDDgnj5k8k

https://youtu.be/Y1PfDxgREHA

if you use an electric hoist it must be certified if it is manual and you use it it depends, I have no employees it is a structure that I will have to use, how do you advise me to conceive and build it economically? it must be light and handy to use and clearly robust to support high loads, thank yo...

https://bladesmithsforum.com/uploads/monthly_2022_04/353450446_gantrycrane.thumb.png.c268ca7333f551b40a647703c3b8b61f.png https://www.materialshandling.com.au/wp-content/uploads/Mobile-gantry-crane-4-800x738.jpg :?: :?: Width: 3.6 meters • Height: 3.2 meters Dimensions: reach 3.6 m, height 3.2 Weig...

hello, I'm just setting up my welding workshop, I don't have cranes or forklifts, but for the heaviest jobs I would need a frame to hook up a chain hoist to set up a sturdy and effective temporary crane, modest capacity around two tons, with a useful height between 3 and 4 meters of useful height an...

hi, my name is nestore, I'm a new user and I'm Italian, thanks for having me among you, I hope to learn a lot from your advice and teachings, thanks, greetings.