Thanks everyone. will do so.

Haven't posted in awhile. Hobbyist welder. Went out into my unheated garage to practice some welding and noticed on my Lincoln tombstone welder, that it was very hard to flip the switch on. Also, it sounded like it was anemic coming on. Had to crank the amperage up so that the rod wouldn't stick. Pa...

Hello all, Been changing the rotors on my vehs. myself and now have a few rotors sitting around the garage. I also replaced the front struts on my F150. was wondering if anyone had any ideas on repurposing this stuff. If I take it to the county dump, they charge you a minimum fee. Thanks

Thanks, I'm going to let it sit in the sun and see if it works any better. if not I'll look into a brand name one. I apologize. it's a solar helmet. when I tried using it, the arch was very bright that I couldn't see.

Hello all, pardon my ignorance. I'm just a hobbyist welder. I had purchased a non brand auto darkening helmet a few months ago and left it in the garage. when I attempted to use it, it didn't work. I checked the setting, and it was set at # 10. my question is, does the battery need to be charged bef...

tweake wrote: ↑Wed Nov 24, 2021 11:59 pm how have you been storing the electrodes?
also what type are they?

I store them in a container in my unheated garage. They're the Vulcan brand from harbor freight.

Hello all. seem to have inconsistent welding from my machine which is a lincoln 225 buzz box. I don't do much welding, but there are days when I do one pass on a project without any issues, and when I go for the second pass, the electrode keeps sticking as if I don't have enough juice. I've increase...

Sorry about getting back so late. Got distracted doing other stuff and totally forgot about this post until I went into the garage this evening to do some welding. will take everyone's advice. was originally welding the stuff together to use as a brace for a stool I was going to make for the garage....

Hello all ,I'm just a hobby welder. a couple of days ago, welded some angle iron to a brake rotor. took a hammer to it, and it separated. used 6011 electrodes and the temp. in the garage was at 32 degrees. any ideas? here's a pic.

thanks

Hello all, does anyone know where I can purchase the lens housing that are similar to the pipefitters helmet, but flat without the curve? want to make my own welding shield. Thanks

Depending on tip size there are fixed cut rates. Cutting by hand is a bit more art than science. Looking at the slag profile left on the cut edge and looking at the profile of the cut edge will reveal if your moving too fast or slow. Post up some pictures. Then we can help more. ok, next time I do ...

well, tried the 6011 and sure enough, burnt a hole. was able to patch it up using 6013's. just welded everything up with the 6013's. it just needs to hold the bike up, not support a building. only have a stick welder for the occasional hobby welding thanks for everyone's input.

the tubing is is just a tad thicker than 1/16th and the flat stock that I'm welding it to, is 1/8th. I'm trying to shorten the kick stand and also enlarge the foot print area so that the kick stand doesn't sink in the black top during very hot days. Thanks

Hello all, as per the subject title. I've heard some negative comments about the 6013 electrodes. I know that the 6011's are a deeper penetrating electrode but I plan on welding a wider pad on the side stand of my bike and the tubing isn't too thick. I don't want to take a chance of burning a hole t...

hello all, have a oxy-propane set up for cutting. I'm no expert. but is there a way to determine if you're moving too fast or slow? sometimes, I have to go over what I just cut through. other times there appears to be excess slag. Thanks

LtBadd wrote:

HTB1ZQJdbamWQ1JjSZPhq6xCJFXa1.jpg

Thanks

thanks for the responses. initially used a grinding disc to remove areas where I had deposited too much metal. then followed up with the flap disc when I got too close to the base metal. the kickstand is back on the bike. what's a tube sander? never heard of such a thing. is it the small rubber drum...

hello all, had to shorten the sidestand on my bike because it stands too vertical. after welding it, used the angle grinder to smooth it out so that it would look like one piece. after I finished it, it's not perfectly round where I had grinded off the excess weld. have watched youtube videos where ...

Hello all, just discovered that there is a hood that's call a pancake hood that might work for me. sometimes when I'm welding, I get back light into my hood. my only question is how do I determine whether I need a right or left side shield. Thanks

TraditionalToolworks wrote:

burnttoast wrote:Thanks for the responses. I didn't give any thought about taking a after picture. Just gave the trowel back

Hopefully it didn't look like your top weld in this thread.

No comment, isn't there something about self incrimination?

Thanks for the responses. I didn't give any thought about taking a after picture. Just gave the trowel back, and the neighbor was surprised. she was taking some plants from my yard a week ago,and had broken it. I discovered it later that day when I went to toss out some garbage. figure it would give...

Hello all, was just tinkering in the garage and welding a neighbors gardening trowel that is made of stainless steel. after I was done, still had a bit of rod left, so decided to see if I could use it on a piece of black pipe that was scrap. it appears to work. does that mean that it's compatible? y...

Thanks for the suggestions. waiting for the rods to arrive.

Coldman wrote:Is the break on the blade or handle stem?
Why not post up a pic so we can have a look.

Here's a pic. Sorry about the delay.